-<xsd:schema elementFormDefault="qualified" attributeFormDefault="unqualified" targetNamespace="http://www.prodml.org/schemas/1series" version="PRODML_v1.3">
<!--
                                                         
 -->
<!--
 Energistics License Agreement
	This file is distributed under the Energistics License Agreement at
	http://www.energistics.org
	Use of this file constitutes agreement with the Energistics License Agreement.
	Copyright (c) 2014 Energistics. All rights reserved.
	Energistics, WITSML, PRODML and RESQML are trademarks or registered trademarks of Energistics.
	
 -->
<!--
                                                         
 -->
 <xsd:include schemaLocation="cs_wellTestInterval.xsd"/>
 <xsd:include schemaLocation="cs_wellTestCumulative.xsd"/>
 <xsd:include schemaLocation="cs_wellTestInjectionTestResults.xsd"/>
 <xsd:include schemaLocation="attgrp_uid.xsd"/>
<!--
                                                         
 -->
-<xsd:complexType name="cs_wellTestInjectionTestData">
-<xsd:sequence>
-<xsd:element name="testDuration" type="prodml:timeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The time length (with uom) of the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="testInterval" type="prodml:cs_wellTestInterval" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The interval tested. This element includes a top and base depth, and the formation tested.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="InjectedFluid" type="prodml:InjectionFluid" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The fluid that is being injected. </xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="wellTestCumulative" type="prodml:cs_wellTestCumulative" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The cumulative volumes of fluids at the time of the well test. The fluids are oil, gas, and water.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="chokeOrificeSize" type="prodml:lengthMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The size of the opening in the flow choke at the wellhead.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="minimumAnnularPressure" type="prodml:pressureMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The minimum pressure measured at the annulus.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="maximumAnnularPressure" type="prodml:pressureMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The maximum pressure measured at the annulus.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="wellheadFlowingPressure" type="prodml:pressureMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The flowing pressure measured at the wellhead during the test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="wellheadMaximumPressure" type="prodml:pressureMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The maximum pressure measured at the wellhead during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="injectionTestResults" type="prodml:cs_wellTestInjectionTestResults" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The production results of the test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
-<xsd:attributeGroup ref="prodml:attgrp_uid">
-<xsd:annotation>
 <xsd:documentation>Unique identifier for the node. </xsd:documentation>
 </xsd:annotation>
 </xsd:attributeGroup>
 </xsd:complexType>
<!--
                                                         
 -->
 </xsd:schema>