-<xsd:schema elementFormDefault="qualified" attributeFormDefault="unqualified" targetNamespace="http://www.prodml.org/schemas/1series" version="PRODML_v1.3">
<!--
                                                         
 -->
<!--
 Energistics License Agreement
	This file is distributed under the Energistics License Agreement at
	http://www.energistics.org
	Use of this file constitutes agreement with the Energistics License Agreement.
	Copyright (c) 2014 Energistics. All rights reserved.
	Energistics, WITSML, PRODML and RESQML are trademarks or registered trademarks of Energistics.
	
 -->
<!--
                                                         
 -->
 <xsd:include schemaLocation="cs_wellTestTestVolume.xsd"/>
 <xsd:include schemaLocation="cs_wellTestFluidRate.xsd"/>
<!--
                                                         
 -->
-<xsd:complexType name="cs_wellTestProductionTestResults">
-<xsd:annotation>
 <xsd:documentation>Oil, gas, and water volumes and rates measured during the well test. The volumes allow either actual volumes or standard (corrected) volumes. The densities are also recorded with the volumes.</xsd:documentation>
 </xsd:annotation>
-<xsd:sequence>
-<xsd:element name="oilVolume" type="prodml:cs_wellTestTestVolume" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Oil volumes measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="oilRate" type="prodml:cs_wellTestFluidRate" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Oil rates measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="gasVolume" type="prodml:cs_wellTestTestVolume" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Gas volumes measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="gasRate" type="prodml:cs_wellTestFluidRate" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Gas rates measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="waterVolume" type="prodml:cs_wellTestTestVolume" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Water volumes measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="waterRate" type="prodml:cs_wellTestFluidRate" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Water rates measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="condensateVolume" type="prodml:cs_wellTestTestVolume" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>condensate volumes measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="condensateRate" type="prodml:cs_wellTestFluidRate" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Condensate rates measured during the well test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="gasOilRatio" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The ratio of the volume of gas and the volume of oil that was produced.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="waterCut" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The ratio of water produced compared to the volume of total liquids produced.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="density" type="prodml:densityMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The density of the fluid mixture.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="fluidVelocity" type="prodml:velocityMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The velocity of the overall fluid mixture.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="condensateYield" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>This is the condensate yield, which describes the amount of condensate per unit of natural gas produced</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="basicSedimentAndWater" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>This is the measured of impurities present in crude oil as it comes from the well. BSandW content is commonly used as a measure for treating performance of hydrocarbon liquids</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="oilPotential" type="prodml:volumeFlowRateMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>This is the the potential of the well to produce crude oil. This represents the flow rate that could be achieved under maximum drawdown.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="gasPotential" type="prodml:volumeFlowRateMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>This is the potential of the well to produce natural gas. This represents the flow rate that could be achieved under maximum drawdown.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="sandVolume" type="prodml:volumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The volume of sand that was produced.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="allocatedSplit" type="prodml:logicalBoolean" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>True ("true" or "1") indicates that the the split factors are allocated as opposed to measured. False ("false" or "0") or not given indicates otherwise.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="oilSplitFactor" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The split factor for Oil relative to the overall volume of the test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="gasSplitFactor" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The split factor for Gas relative to the overall volume of the test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="waterSplitFactor" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The split factor for Water relative to the overall volume of the test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="condensateSplitFactor" type="prodml:volumePerVolumeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The split factor for Condensate relative to the overall volume of the test.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="productivityIndex" type="prodml:productivityIndexMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Productivity Index (PI) is an expression which defines the pressure drop in the reservoir to produce a unit of oil per day. That is, the energy to produce a unit of oil. The value was defined at ambient temperature and pressure.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="productivityIndexStdTempPres" type="prodml:productivityIndexMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Productivity Index (PI) is an expression which defines the pressure drop in the reservoir to produce a unit of oil per day. That is, the energy to produce a unit of oil. The value has been converted to the declared conditions of standard temperature and pressure.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
<!--
                                                         
 -->
 </xsd:schema>