-<xsd:schema elementFormDefault="qualified" attributeFormDefault="unqualified" targetNamespace="http://www.prodml.org/schemas/1series" version="PRODML_v1.3">
<!--
                                                         
 -->
<!--
 Energistics License Agreement
	This file is distributed under the Energistics License Agreement at
	http://www.energistics.org
	Use of this file constitutes agreement with the Energistics License Agreement.
	Copyright (c) 2014 Energistics. All rights reserved.
	Energistics, WITSML, PRODML and RESQML are trademarks or registered trademarks of Energistics.
	
 -->
<!--
                                                         
 -->
 <xsd:include schemaLocation="typ_dataTypes.xsd"/>
 <xsd:include schemaLocation="typ_catalogProdml.xsd"/>
 <xsd:include schemaLocation="typ_dataTypesProdml.xsd"/>
 <xsd:include schemaLocation="typ_catalog.xsd"/>
 <xsd:include schemaLocation="cs_instrument.xsd"/>
 <xsd:include schemaLocation="cs_dtsPatchCord.xsd"/>
 <xsd:include schemaLocation="cs_dtsCalibration.xsd"/>
 <xsd:include schemaLocation="cs_extensionNameValue.xsd"/>
-<xsd:complexType name="grp_dtsInstrumentBox">
-<xsd:annotation>
 <xsd:documentation>The group of elements corresponding to a DTS instrument box.</xsd:documentation>
 </xsd:annotation>
-<xsd:complexContent>
-<xsd:extension base="prodml:cs_instrument">
-<xsd:sequence>
-<xsd:element name="serial_number" type="xsd:string" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>An identification tag for the instrument box. A serial number is a type of identification tag however some tags contain many pieces of information. This structure just identifies the tag and does not describe the contents.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="internalOvenLocationNear" type="prodml:lengthMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Near distance of the oven from the beginning of the fiber.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="internalOvenLocationFar" type="prodml:lengthMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Far distance of the oven from the beginning of the fiber.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="referenceCoilTemperature" type="prodml:thermodynamicTemperatureMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The temperature of the oven.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="parameter" type="prodml:indexedObject" minOccurs="0" maxOccurs="unbounded">
-<xsd:annotation>
 <xsd:documentation>Additional parameters to define the instrument box as a piece of equipment. These should not be parameters to define the installation or use of the box in the wellbore, or other system. This element should be used only if an appropriate parameter is not available as an element, or in the calibration operation.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="warmupTime" type="prodml:timeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The duration of time starting from the initiation of the first temperature measurement until the unit complies with the stated values of the main measurement specifications.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="startupTime" type="prodml:timeMeasure" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>The start-up time is the duration of time from the initial powering on the instrument until the first temperature measurement is permitted.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="instrumentCalibration" type="prodml:cs_dtsCalibration" minOccurs="0" maxOccurs="unbounded">
-<xsd:annotation>
 <xsd:documentation>Calibration parameters vary from vendor to vendor, depending on the calibration method being used. This is a general type that allows a calibration date, business associate, and many name/value pairs. </xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="extensionNameValue" type="prodml:cs_extensionNameValue" minOccurs="0" maxOccurs="unbounded">
-<xsd:annotation>
 <xsd:documentation>Extensions to the schema based on a name-value construct.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
-<xsd:element name="cs_dtsPatchCord" type="prodml:cs_dtsPatchCord" minOccurs="0" maxOccurs="1">
-<xsd:annotation>
 <xsd:documentation>Information regarding the patch cord used to connect the instrument box to the start of the optical fiber path.</xsd:documentation>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
 </xsd:extension>
 </xsd:complexContent>
 </xsd:complexType>
 </xsd:schema>