-<xsd:schema elementFormDefault="qualified" attributeFormDefault="unqualified" targetNamespace="http://www.prodml.org/schemas/1series" version="PRODML_v1.3">
<!--
                                                         
 -->
<!--
 Energistics License Agreement
	This file is distributed under the Energistics License Agreement at
	http://www.energistics.org
	Use of this file constitutes agreement with the Energistics License Agreement.
	Copyright (c) 2014 Energistics. All rights reserved.
	Energistics, WITSML, PRODML and RESQML are trademarks or registered trademarks of Energistics.
	
 -->
<!--
                                                         
 -->
-<xsd:annotation>
 <xsd:documentation> These types represent numeric quantities with a unit of measure implemented as a uom attribute. The units are gathered into single quantity class which represents a group of units. The unit symbols appropriate for the class are captured as enumerated lists. The implementation of this is to develop a type for each uom class that is a union of a standard list, the unknown value, and the Other: extension. Additional files will contain these structures. </xsd:documentation>
 </xsd:annotation>
<!--
                                                         
 -->
 <xsd:include schemaLocation="typ_quantityClassProdml.xsd"/>
 <xsd:include schemaLocation="typ_quantityClass.xsd"/>
<!--
                                                         
 -->
-<xsd:complexType name="amountOfSubstanceMeasure" final="#all">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:AmountOfSubstanceUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="compressibilityMeasure">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:CompressibilityUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
<!--
NOT-USED: Deleted type energyPerAreaMeasure.
 -->
<!--
                                                         
 -->
-<xsd:complexType name="frequencyMeasure" final="#all">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:FrequencyUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
<!--
NOT-USED: Deleted type magneticFieldStrengthMeasure.
 -->
<!--
                                                         
 -->
-<xsd:complexType name="massConcentrationMeasurePercent" final="#all">
-<xsd:annotation>
 <xsd:documentation>A mass per mass measure that is constrained to a unit of percent.</xsd:documentation>
 </xsd:annotation>
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:PercentUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="massFlowRateMeasure" final="#all">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:MassFlowRateUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="modulusOfCompressionMeasure" final="#all">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:ModulusOfCompressionUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="molarFractionMeasurePercent" final="#all">
-<xsd:annotation>
 <xsd:documentation>The number of moles as a proportion of the total number of moles measure that is constrained to a unit of percent.</xsd:documentation>
 </xsd:annotation>
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:PercentUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="molarVolumeMeasure">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:MolarVolumeUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="productivityIndexMeasure">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:ProductivityIndexUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="thermalConductivityMeasure">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:ThermalConductivityUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="standardVolumeMeasure">
-<xsd:annotation>
 <xsd:documentation>A volume corrected to standard conditions of temperature and pressure. The standard conditions must be known outside the context of the data type because the unit of measure is independent of the standard conditions. The main intent of this type is to allow programatic determination of where standard conditions are assumed.</xsd:documentation>
 </xsd:annotation>
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:VolumeUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="standardVolumePerStandardVolumeMeasure">
-<xsd:annotation>
 <xsd:documentation>A ratio of volumes that have each been corrected to standard conditions of temperature and pressure. The standard conditions must be known outside the context of the data type because the unit of measure is independent of the standard conditions. The main intent of this type is to allow programatic determination of where standard conditions are assumed.</xsd:documentation>
 </xsd:annotation>
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:VolumePerVolumeUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="standardVolumePerVolumeMeasure">
-<xsd:annotation>
 <xsd:documentation>A ratio of a volume that has been corrected to standard conditions of temperature and pressure to an uncorrected volume. The standard conditions must be known outside the context of the data type because the unit of measure is independent of the standard conditions. The main intent of this type is to allow programatic determination of where standard conditions are assumed.</xsd:documentation>
 </xsd:annotation>
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:VolumePerVolumeUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="volumePerStandardVolumeMeasure">
-<xsd:annotation>
 <xsd:documentation>A ratio of an uncorrected volume to a volume corrected to standard conditions of temperature and pressure. The standard conditions must be known outside the context of the data type because the unit of measure is independent of the standard conditions. The main intent of this type is to allow programatic determination of where standard conditions are assumed.</xsd:documentation>
 </xsd:annotation>
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:VolumePerVolumeUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="workMeasure" final="#all">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
 <xsd:attribute name="uom" type="prodml:WorkUom" use="required"/>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
-<xsd:complexType name="attenuationMeasure">
-<xsd:simpleContent>
-<xsd:extension base="prodml:abstractMeasure">
-<xsd:attribute name="uom" type="prodml:AttenuationUom" use="required">
-<xsd:annotation>
 <xsd:appinfo>Added-in-version=DTS1.0</xsd:appinfo>
 </xsd:annotation>
 </xsd:attribute>
 </xsd:extension>
 </xsd:simpleContent>
 </xsd:complexType>
<!--
                                                         
 -->
 </xsd:schema>